Questo prodotto non è più disponibile nell'assortimento attualmente offerto da Trust.
ZYCT-202
Telecomando con montaggio a parete magnetico
Telecomando ZigBee con montaggio a parete per gestire in modalità wireless 1 o più luci/dispositivi
product-specifications
Specifiche
Size & Weight
Total weight
120 g
Depth of main product (in mm)
15 mm
Width of main product (in mm)
70 mm
Height of main product (in mm)
115 mm
Control
Controls
dimm, dimm+, on/off
Connectivity
Wireless protocols
RF 2.4GHz
Wireless range
30 m
Power
Batteries included
yes
Battery life (months)
36 month
Wireless transmission power (dBM)
2.5 dBM
Input
Power source
battery
Ulteriori informazioni
Numero di articolo
71171
Codice EAN
8713439711714
Garanzia
1 anno
Contenuto della confezione
Telecomando con batteria inclusa (CR2450)
Manuale
Montaggio a parete magnetico
Requisiti di sistema
Lampadina/riflettore LED Trust Smart Home ZigBee o stazione di controllo Trust, ad esempio Z1 ZigBee Bridge o ICS-2000 (oppure un altro dispositivo con certificazione ZigBee Light Link, come Philips Hue)*
*per conoscere le informazioni più aggiornate sulla compatibilità, si invita a consultare il sito www.trust.com/zigbee
faq
FAQ
Domande frequenti (FAQ)
Note: the confirmation of the pairing is done with the channel LEDs on the remote, the Hue App does not show a confirmation and the remote will not appear in the Hue App. However, you can now connect bulbs to your remote via Touchlink (see user manual) without the bulbs losing their connection to the Hue bridge.
Note 2: Only works if the ZYCT-202 has not been paired before with another device.
If the ZYCT-202 was paired before, reset it first: hold the [OFF] button on the remote for 10 sec, untill all LEDs will light up to comfirm the reset.
Yes, but the remote is restricted to only switching and dimming the lamps. To control warm-, cold- or RGB-colors you need the ICS-2000 or Zigbee Z1.
The Zigbee lamps can also be used with the ZYCT-202 Zigbee Remote (only switching and dimming)
You can do this by resetting the bulb or by pressing ON and OFF on the Zigbee remote at a maximum distance of 10cm from the bulb.
A couple of tips for optimal range:
- Make sure your Zigbee control station is placed at a central point in your home or room.
- Make sure there are no metal objects in close range of your Zigbee control station.
- Make sure your Zigbee control station is completely detached and there is enough distance (minimum 1 meter) between the Zigbee control station and other devices such as a Wifi router, Dect phones (Gigaset) etc.
- If you add multiple Zigbee lamps or devices, they will amplify each others signal (this is called mesh networking)
- If neccessary, our support department can help you with setting a different Zigbee channel to reduce disturbance with your Wifi network. The range of the Zigbee system is max. 30 metres in optimal conditions.
No, this is not possible. When you connect a Zigbee light to, for example, our Zigbee Bridge Z1, the connection with the original control station is undone.
Make sure the Zigbee remote is within a distance of 2 meter from the Zigbee Bridge
- Push the + button in the app to add a new device
- Choose Zigbee Remote Control
- Follow the instructions in the app.
- Press and hold the Smart Group-button of the remote and press connect in the app
Yes, that is possible. First pair the lamp and the remote with your Trust Smart Home Zigbee Z1 or ICS-2000 and after that connect the lamp and the remote.
Max 20 lamps with a maximum of 4 per channel.
You can press the Smart Group-button to control all the lamps at the same time, or use the group buttons to control up to 4 lamps at the same time.
Turn the ZLED Zigbee lamp OFF and ON again and make sure to hold the remote as close as possible to the lamp while pairing.
Make sure that the remote control isn't set to the smart group function/
- Push the ON button on the remote.
- Keep the ON button pressed untill the lamp turns on and off 3x. (This can take up to 20 seconds.)
- Keep holding the ON button untill the lamp has flashed 2x to confirm the connection, then release the ON button.
Reset the remote control by pressing and holding the OFF button. Make sure that the remote control isn't set to the group channel and first press 'connect' in the app, befor putting the remote control in pair-mode by pressing and holding the button with the two lamps on it.
Le consiglio di chiedere la sostituzione dell'articolo direttamente dal rivenditore.
Nel caso in cui il prodotto sia difettoso, è possibile restituirlo al rivenditore insieme a una descrizione del tipo di malfunzionamento, alla prova d''acquisto e a tutti gli accessori.
Se il prodotto è ancora in garanzia, riceverete un prodotto sostitutivo (se disponibile) dal rivenditore.
Condizioni di garanzia:
https://www.trust.com/support/warranty
This is possible when using the ICS-2000 Control Station. Create a rule that has the Start Line receiver as a trigger and turning ON a Zigbee lamp as action.
Zigbee is a 2-way system, allowing you to see the status of your lights in our app. Apart from that, Zigbee uses mesh networking. If you use multiple lamps or other Zigbee devices, they amplify each others signal.
supportMail
Contattaci
Contattaci
Per prima cosa controlla le nostre FAQ, è probabile che troverai la risposta lì.
Non hai trovato la risposta nelle domande frequenti? Compila il modulo sottostante con quante più informazioni possibili e uno dei nostri addetti all'help desk risponderà il prima possibile. I nostri messaggi ricevono risposta nell'ordine in cui vengono ricevuti.
Dopo aver inviato il modulo, verrà visualizzato un messaggio di conferma con il numero di riferimento. Questa conferma è stata inviata al suo indirizzo e-mail allo stesso tempo. Se non hai ricevuto questo messaggio, controlla la sua cartella spam o posta indesiderata. Se non riesci a trovare la conferma, si prega di inviare nuovamente il modulo con il suo indirizzo e-mail corretto.