Videocamera IP WiFi con visione notturna per esterni, per monitorare la casa e i propri beni da ogni luogo
Videocamera IP WiFi per esterni
Montaggio regolabile
Alimentatore
Antenna WiFi
Materiali di montaggio
Manuale
Rete domestica WiFi/LAN
Connessione all'alimentazione di rete
Smartphone/tablet con iOS 9+ o Android 4.0+
Check if you have completed the installation, including selecting your WiFi network. Check to be sure the following
steps:
Customize the detection sensitivity at the setting of the camera. Or disable the motion detection completely.
Go to the settings of the camera and turn on ''detect movement'' and link to a notification interval.
That unfortunately not possible. The camera can be signed up seperately in the home screen of the Smart Home app so that you can check the camera in a separate camera environment.
Yes that is possible. There is no limit to the number of cameras that can be registered in the app.
Yes that is possible.
When a new firmware is available for the IP camera the option Update Firmware becomes available. Press Update firmware to download and install the latest firmware for the IP Camera. After the new firmware is downloaded and installed the camera will reboot.
With nightvision mode you can select if the camera must switch automatically to night vision when there is not enough surrounding light. Or set it to manual so the nightvision can be switched on or off manually.
Press on Video Quality to change the video quality. An overview is shown of the different picture settings. Then select the desired quality. After that the app will return to the settings screen.
When the video stream has been recorded you can view the recording by pressing View recordings. A new screen is opened with an overview of the recorded video streams. Press the recording you want to view.
Yes that is possible. Go to ''View recordings'' and select the video.To download the recorded video press the download button on the bottom of your screen.
If you have lost the connection with the camera, your IPCAM might have lost the WiFi connection. Restart your camera by cutting the power off for some seconds. After about five minutes the camera will be restarted again and the connection should be restored.
To reset the camera, open the cap of the reset cable and press the reset button for about 10 seconds. The camera will be set and restarted. After the restart the blue LED will light up.
Le consiglio di chiedere la sostituzione dell'articolo direttamente dal rivenditore.
Nel caso in cui il prodotto sia difettoso, è possibile restituirlo al rivenditore insieme a una descrizione del tipo di malfunzionamento, alla prova d''acquisto e a tutti gli accessori.
Se il prodotto è ancora in garanzia, riceverete un prodotto sostitutivo (se disponibile) dal rivenditore.
Condizioni di garanzia:
https://www.trust.com/support/warranty
That is not possible.
Per prima cosa controlla le nostre FAQ, è probabile che troverai la risposta lì.
Non hai trovato la risposta nelle domande frequenti? Compila il modulo sottostante con quante più informazioni possibili e uno dei nostri addetti all'help desk risponderà il prima possibile. I nostri messaggi ricevono risposta nell'ordine in cui vengono ricevuti.
Dopo aver inviato il modulo, verrà visualizzato un messaggio di conferma con il numero di riferimento. Questa conferma è stata inviata al suo indirizzo e-mail allo stesso tempo. Se non hai ricevuto questo messaggio, controlla la sua cartella spam o posta indesiderata. Se non riesci a trovare la conferma, si prega di inviare nuovamente il modulo con il suo indirizzo e-mail corretto.