Беспроводной динамик Bluetooth

• First fully charge the speaker. This will take at least 4 hours.
• When the speaker is fully charged, press the on/off button for 3 seconds to start the pairing process. The light will flash blue.
• Go to the Bluetooth section on your device, and select the FYBER GO to pair the device. 
• When the device is successfully paired, the light will stay blue.
• The speaker is ready for use

If the speaker can't be paired (no device is found), press the backward and forward buttons together for 5 seconds to reset the connection.

To play music via USB or SD-card, you have to use a fat32 formatted card, with max. 32GB, with mp3 or wma audio files.

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

As of iOS 11.2, when you are using a Bluetooth headphone and receive a phone call, the button that you use to pick-up the phone call, determines which device is used for the audio.

If you pick-up the phone call with the green button on the iPhone display, then all the audio will be handled by the iPhone microphone and speaker (and not with any connected Bluetooth device).

If you pick-up the phone call with the call pick-up button on the Bluetooth device (headphone or speaker), then all the audio will be handled by the Bluetooth device.

If the person that is calling you cannot hear you – or the other way around – it may be possible that you picked up the phone with one device and are talking via another.

Use the audio icon on the iPhone display during the phone call to change the audio device.