Bu "eski" bir üründür ve geçerli Trust ürün grubu içinde artik yer almamaktadir.
Paxo
Aktif Gürültü Önleme özelliğine sahip Bluetooth kulaklık
Müziğin keyfini çıkarmanız ve rahatlamanız için Aktif Gürültü Önleme özelliğine sahip kablosuz Bluetooth kulaklık
product-specifications
Özellikler
Features
Noise reduction
yes
Background noise reduction
yes
Software
no
Foldable
no
Size & Weight
Total weight
188 g
Depth of main product (in mm)
200 mm
Width of main product (in mm)
170 mm
Height of main product (in mm)
50 mm
Control
Remote control
on earcap
Controls on earcap
yes
Controls
call pick-up, off, play, pause, next, prev, off, volume
LED indicators
yes
Connectivity
Connection type
wired, wireless
Bluetooth
yes
Connector type
3.5mm
Wireless protocols
Bluetooth
Wireless range
10 m
Bluetooth version
4.2
Audio
Sound reproduction
Stereo
Audio channels
2.0
Driver size
40 mm
Microphone
yes
Detachable microphone
no
True Wireless Stereo (TWS)
no
Bluetooth profiles
A2DP, HSP, HFP, AVRCP
Impedance
32 Ohm
Sensitivity
105 dB
Headphone
Adjustable headband
yes
Earcup type
over-ear
Swivel earcups
yes
Output channels
2
Magnet type
Neodymium
Active Noise Cancelling
yes
Microphone
Sensor type microphone
condenser
Pick-up pattern
Omnidirectional
Gaming
Designed for gaming
no
Lighting
Lights
no
Protection
Waterproof
no
IP Code (International Protection Rating)
no
Power
Rechargeable battery
yes
Input
Power source
battery, micro-USB
Compatibility
Suitable for
Calling, Daily use, Listening to music, Noisy environment (e.g. plane, office), Air travel, Home, Office
Compatible Device Types
smartphone, tablet, pc, laptop
Compatible Consoles
no
Compatible Software Platforms
MacOS, iOS, Chrome OS, Android, Windows
General compatibility
any Bluetooth device with A2DP
Ekstra bilgi
Ürün numarası
22451
EAN-kodu
8713439224511
Garanti
1 yıl
Ambalajın içeriği
Kulaklıklar
Mikro-USB şarj kablosu
3,5 mm Aux kablosu
Kullanım kılavuzu
Sistem gereksinimleri
Bluetooth desteğine ya da 3,5 mm ses çıkına sahip tablet veya akıllı telefon
Kulaklıkların şarj edilmesi için USB şarj aleti
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
- Fully charge the headset, this will take approx. 2 hours.
- Press the middle button on the headset for 5 seconds to start the pairing process. The light will flash red-blue.
- Go to the Bluetooth section on the phone and select the TRUST PAXO.
Note: for some phones it may be necessary to switch Bluetooth off and back on before starting to pair. - The headset is ready to use.
When the battery is down to 10% the headphones will give a low battery sound warning and show a red led.
The playtime as of that moment varies from 1 - 40 minutes, depending on the volume.
When the battery is down to 10% the headphones will give a low battery sound warning and show a red led.
The playtime as of that moment varies from 1 - 40 minutes, depending on the volume.
You switch off the headphones by pressing the middle button for at least 5 seconds.
The light will go red for a second and then switch off.
We advise to:
- Switch off the headset by holding the button for at least 5 seconds, then the light will flash red for a second, and the unit will switch off.
- After it has switched off, start the pairing process by holding the button for at least 10 seconds until the light will flash blue/red.
- Now pair the headset to one of your devices.
First always fully charge the headset, this will take approx. 2 hours. The light is red when charging, the light will switch off when the headset is fully charged.
Press the middle button on the headset for 5 seconds to start the pairing process. The light will flash red-blue.
Go to the Bluetooth section on the phone and select the TRUST PAXO. The light will become blue when the headset is paired to the phone.
The headset is ready to use.
The light is red when the headset is switched on, the light is off when the headset is switched off.
If the issue persists, we advise to reset the headset (by switching the headset off, then pressing the button for at least 10 seconds) and restart the above procedure.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
As of iOS 11.2, when you are using a Bluetooth headphone and receive a phone call, the button that you use to pick-up the phone call, determines which device is used for the audio.
If you pick-up the phone call with the green button on the iPhone display, then all the audio will be handled by the iPhone microphone and speaker (and not with any connected Bluetooth device).
If you pick-up the phone call with the call pick-up button on the Bluetooth device (headphone or speaker), then all the audio will be handled by the Bluetooth device.
If the person that is calling you cannot hear you – or the other way around – it may be possible that you picked up the phone with one device and are talking via another.
Use the audio icon on the iPhone display during the phone call to change the audio device.
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.