GXT 103 GAV

There is no driver needed or available for this device. Once the device is connected, your system installs its own built-in system driver for it.

• Make sure your system is up to date
• Unplug the device and restart the system.
• When your system has completely loaded, connect the device directly to the USB port without using a hub or an extension cable.
• Check in the Device Manager if the product is correctly installed or if there is any error message reported.
• The device is ready to be used.

Yes, it is possible to press multiple buttons simultaneously. 

Please note that this doesn't mean that all buttons can be pressed simultaneously, since this depends on the specific hardware of a mouse. Mice may have the hardware limitation that the thumb buttons can't be used together with left/right/mid click.

By pressing the DPI-button you will change the DPI.

There is no visual indication for the DPI selection, other than that the pointer speed on the screen will be faster or slower, depending on the DPI that is selected.

This mouse uses standby (sleep) mode to save battery power.
There is no need to switch it off.
When the mouse is not moving or there is no signal from the USB receiver, it will turn sleep-mode on, to save battery power.
For storage or travelling we would suggest to remove the batteries.

Follow the steps in the mouse settings page

Depending on the version of your mouse, the receiver is stored either inside the product (bottom) itself, or inside the battery compartment of the mouse.

It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.

It appears that the mouse is not properly paired with the receiver. To pair the receiver:
- Disconnect the USB-receiver from the PC
- Place the battery in the mouse again and wait 10 seconds (mouse will go in stand-by mode)
- Press both the right and middle mouse buttons for two seconds and connect the USB-receiver to the PC, while the mouse is within 50 cm of the receiver.
- The mouse should now connect to the receiver.
 

We recommend fully reinstalling the product, including with new batteries.

Make sure that all errors have been removed from Device Manager, remove the receiver, and then restart the computer.
When the computer has completely restarted, connect the receiver to the computer without using a hub or extension cable.
The computer detects the product and installs the integrated driver. This can take a moment.
The product can now be used.

If the problem persists, test the product on another USB port and another computer to rule out a problem with the computer.

• Try using the mouse on a different surface or use a mousepad.
• Clean the sensor on the bottom of the mouse with a dry cloth.
• Improve wireless performance.

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

Although our keyboards and mice are designed for use with computers, they can be used on PS4. However please note, most PS4 games do not support a keyboard and mouse.

When using a (wired) keyboard or mouse with a PS4, make sure it connects well with the PS4. If the PS4 has a connection on the back, connect the keyboard/mouse to the USB-connection on the back of the PS4. Or alternatively use an extension cable or USB hub.

You can use our mice and keyboards on the Xbox One.

Please note that Xbox One supports the use of mouse and keyboard in some games and apps, but it doesn’t work for every game or app. The game or app publisher must enable this feature for their content.

For more information, consult the Xbox support website via https://support.xbox.com/help/Hardware-Network/accessories/mouse-keyboard