Bu "eski" bir üründür ve geçerli Trust ürün grubu içinde artik yer almamaktadir.
IPCAM-3000
Gece görüşlü Dış Mekan WiFi IP Kamerası
Gece görüşlü Dış Mekan WiFi IP Kamerası her konumdan evinizi ve eşyalarınızı izlemenizi sağlar
product-specifications
Özellikler
Size & Weight
Depth of main product (in mm)
85 mm
Width of main product (in mm)
134 mm
Height of main product (in mm)
129 mm
Sensor
Sensor resolution
1280*720
Sensor type
motion
Control
Controls
reset
Indicators
Power
Electronic
Input frequency of main device
50 Hz
Receiver
Max number of transmitters supported
0
Transmitter
Number of control channels
0
Connectivity
Cables included
Power cable, network cable
Wireless protocols
WiFi
Wireless range
15 m
WiFi
WiFi frequencies supported
2.4 GHz
Audio
Microphone
no
IP camera
Detection grid
yes
Night vision
yes
Night vision range
25 m
Talk back
no
Lens angle
70 degrees
Imaging
Lens material
Glass
Max Framerate
30 fps
Face tracking
no
Focus type
fixed focus
Face recognition
no
Motion detection
yes
Protection
IP Code (International Protection Rating)
IP65
Materials
Mounting materials included
screws
Power
Wireless transmission power (dBM)
2 dBM
Input
Power plug type
EU
Power source
wall socket
Input rating
230v power adapter to 5V
Mains socket
Double isolation
double
Mains plug grounded
no
Power cable length
70 cm
Power adapter
Power adapter included
yes
Power adapter output current
2 A
Power adapter output voltage
5 V
Input frequency
50 Hz
Input voltage
230 V
Embedded
Network communication protocols
TCP
Firmware OTA updateable
yes
RAM Memory size
16000 MB
Max external storage size
16000 MB
Compatibility
Compatible Product Lines
Plus Line
Compatible Software Platforms
iOS, Android
Ekstra bilgi
Ürün numarası
71183
EAN-kodu
8713439711837
Garanti
1 yıl
Ambalajın içeriği
Dış mekan Wi-Fi IP Kamerası
Ayarlanabilir montaj parçası
Güç adaptörü
Wi-Fi anteni
Montaj malzemeleri
Kullanım Kılavuzu
Sistem gereksinimleri
WiFi/LAN Ev ağı
Ana elektrik bağlantısı
IOS 9+ ve Android 4.0+'ya sahip akıllı telefon/tablet
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
Check if you have completed the installation, including selecting your WiFi network. Check to be sure the following
steps:
- On the reset cable you will find a reset button. Press this button for ten seconds until the device will ''pining''.
- Leave the camera alone for five minutes so he can restart.
- Go to your WiFi settings and wait untill an IPCH number appears. Press on the IPCH number and when you see ''forgot'', then press on that and go back to the app.
- Remove the camera in the app and install the new camera.
- After you have seen the first image, press on the check mark, arrow or further (this differs per device).
- There will be asked for your network data. Fill these in and restart the camera.
- After the camera restarted you will get a confirmation.
Customize the detection sensitivity at the setting of the camera. Or disable the motion detection completely.
Go to the settings of the camera and turn on ''detect movement'' and link to a notification interval.
That unfortunately not possible. The camera can be signed up seperately in the home screen of the Smart Home app so that you can check the camera in a separate camera environment.
Yes that is possible. There is no limit to the number of cameras that can be registered in the app.
Yes that is possible.
When a new firmware is available for the IP camera the option Update Firmware becomes available. Press Update firmware to download and install the latest firmware for the IP Camera. After the new firmware is downloaded and installed the camera will reboot.
With nightvision mode you can select if the camera must switch automatically to night vision when there is not enough surrounding light. Or set it to manual so the nightvision can be switched on or off manually.
Press on Video Quality to change the video quality. An overview is shown of the different picture settings. Then select the desired quality. After that the app will return to the settings screen.
When the video stream has been recorded you can view the recording by pressing View recordings. A new screen is opened with an overview of the recorded video streams. Press the recording you want to view.
Yes that is possible. Go to ''View recordings'' and select the video.To download the recorded video press the download button on the bottom of your screen.
If you have lost the connection with the camera, your IPCAM might have lost the WiFi connection. Restart your camera by cutting the power off for some seconds. After about five minutes the camera will be restarted again and the connection should be restored.
To reset the camera, open the cap of the reset cable and press the reset button for about 10 seconds. The camera will be set and restarted. After the restart the blue LED will light up.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
That is not possible.
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.