GXT 242 Lance

1. Assemble the microphone and set it in your preferred position
2. Connect the USB-plug to the USB-connection of the computer
3. Set the microphone as the default sound input and the speaker as the default sound output device on the computer.
4. Check the microphone properties and on Windows 10 the Microphone Privacy settings.
5. The microphone is ready to use

If you are using Windows 10 and the microphone is not performing optimally (e.g. too low volume), we would advise to check the Windows audio drivers. Make sure the audio drivers (e.g. Realtek drivers) are up-to-date by downloading and installing the latest audio drivers via the website of the computer's manufacturer.

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

You can use the GXT 253 microphone arm with the following Trust microphones:

• 21753 - GXT 252 Emita Streaming Microphone
• 22400 - GXT 252+ Emita Plus Streaming Microphone
• 22614 - GXT 242 Lance Streaming Microphone
• 23465 - GXT 258 Fyru USB 4-in-1 Streaming Microphone
  Note:
  - this microphone fits the arm, but can't be mounted directly onto the shock mount. However with the included (with the microphone arm) adapter you can screw this microphone onto the arm. 
  - the integrated USB-B cable from the 22563 - GXT 253 Microphone Arm is not supported by 23465 - GXT 258 FYRU Microphone.
• 23510 - GXT 256 Exxo USB Streaming Microphone
• 23466 - GXT 244 Buzz USB Streaming Microphone

You can connect the microphone only when it is an iPad Pro (with USB-C connection).
And then you have to use a USB-C to USB-A converter to connect the microphone to the iPad.

The pick-up pattern of a microphone is the sensitivity to sound relative to the direction or angle from which the sound arrives, or how well the microphone "picks up" the sound from different directions. The most common types are: Cardioid, Omnidirectional, Unidirectional, Bidirectional.

CARDIOID
The most commonly used pattern is most sensitive at 0° (the front) and least sensitive at 180° (the back). This isolates it from unwanted ambient sound. You can use this for most recording applications. It is easy to get a good signal as the cardioid pattern blends out a bad sounding room, a noisy fan in the background, etc.

OMNIDIRECTIONAL
The omnidirectional microphone has equal sensitivity at all angles. This means it picks up sound evenly from all directions. Therefore, the microphone need not be aimed in a certain direction. It will be especially useful in good sounding rooms.

UNIDIRECTIONAL
Unidirectional microphones are most sensitive to sound arriving from directly in front (at 0°) and less sensitive in other directions. This makes unidirectional microphones effective at isolating the desired sound from both unwanted sound and ambient noise.

BIDIRECTIONAL
A bidirectional microphone (with figure-8 pattern) picks up the sound from in front of the microphone (at 0°) and from the rear (at 180°), but not the side (at 90° and 270°). It can be beneficial in situations where you do not want a signal coming from a 90° angle to bleed into the microphone.