Şu anda mevcut
Verto
Dikey ergonomik fare
Kola bileğe binen yükü azaltmak için ergonomik dikey tasarımlı fare
Tamamen doğal
Verto Ergonomik Farenin ergonomik şekli kolunuzu ve bileğinizi doğal, 60 derecelik bir konuma yerleştirir, kol ve bilek gerilmesini azaltır - böylece daha konforlu ve verimli şekilde çalışabilirsiniz.
Temel Özellikler
Üst düzey konfor
Hafif tasarım ve başparmak desteği konforu daha da iyileştirirken kauçuk kaplama kavrayışı ve dayanıklılığı artırarak odağınızın dağılmamasını ve verimli çalışmanızı sağlar.
Kontrol sizde olsun
1000 ve 1600 DPI kapasitesinde bir optik sensör ve 6 düğme - 2 ana, 2 yan, bir DPI düğmesi ve bir kaydırma tekerleği size daha iyi kontrol sağlar ve doğruluğu artırır.
Kolay ve şık
1,5 m USB kablo tak ve çalıştır özelliği ve bolca hareket özgürlüğü sunar. Ek olarak, mavi led çalışma ortamınıza ölçülü, şık - ancak zarif - bir hava verir.
product-specifications
Özellikler
General
Formfactor
large
Ergonomic design
yes
Height of main product (in mm)
120 mm
Width of main product (in mm)
63 mm
Depth of main product (in mm)
75 mm
Weight of main unit
89 g
Features
DPI adjustable
yes
Silent click
no
Gliding pads
teflon
Software
no
Special features
- DPI selection button
- Blue LED light
Sensor
DPI
1000, 1600
Max. DPI
1600 dpi
Sensor technology
optical
Control
Grip type
palm
Left-right handed use
right-handed
Scroll wheel
yes
Trackball
no
Horizontal scrolling
no
Controls
left, mid, right, backward, forward, dpi
Number of buttons
6
DPI button
yes
Programmable buttons
no
Adjustable weight
no
Suitable surface
non-reflective flat surface
Connectivity
Connection type
wired
Bluetooth
no
USB version
2.0
Cables included
Attached
Connector type
USB
Cable length main cable
150 cm
Gaming
Designed for gaming
no
Lighting
Lights
yes
Input
Power source
USB
Compatibility
Compatible Device Types
pc, laptop
Compatible Software Platforms
Mac OS, Chrome OS, Windows
Ekstra bilgi
Ürün numarası
22885
EAN-kodu
8713439228854
Garanti
1 yıl
Ambalajın içeriği
Fare
Sistem gereksinimleri
Windows 10, 11
macOS 10.15, 11, 12*
Chrome OS*
USB portu
*Yan düğmelerin uyumluluğu işletim sistemine göre değişebilir
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
To install the mouse:
- Place the USB-plug in a USB-port of the computer
- The computer will recognize the mouse and install the mouse to the computer, this might take a few moments
- The mouse is ready to use
Unfortunately the blue lighting can't be switched off.
By pressing the DPI-button you will change the DPI.
There is no visual indication for the DPI selection, other than that the pointer speed on the screen will be faster or slower, depending on the DPI that is selected.
This mouse uses a generic driver of Windows, which doesn't provide a possibility to adjust button functions.
However, you can try with software which is available on internet to configure the buttons.
http://www.highrez.co.uk/downloads/XMouseButtonControl.htm
Please note that this solution is not official, as there is no Trust software available for programming the buttons, and therefore it is not supported, nor is proper functioning of the software guaranteed.
-
Try using the mouse on a different surface or use a mousepad.
-
Clean the sensor on the bottom of the mouse with a dry cloth.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.