Şu anda mevcut
Işıklı 2.0 hoparlör seti
GXT 610 Argus
Titreşimli LED aydınlatmalı 2.0 hoparlör seti
Sesi hissedin
20 W pik güç (10 W RMS) ile heyecan dolu bir şekilde film izleyin, oyun oynayın, yayın yapın veya neyle ilgileniyorsanız onu yapın; kendinizi olayın içinde hissedin ve yüksek kaliteli ses elde edin.
Temel Özellikler
Çok ses, az yer
Kompakt 2.0 tasarımı, en iyi şekilde eğlenmeniz için ihtiyacınız olan sesi size sağlarken masaüstündeki karmaşıklığı azaltır.
Her cihazla uyumlu
Ses girişi için 3,5 mm girişli herhangi bir masaüstüne, dizüstü bilgisayara veya diğer cihazlara bağlayabilir ve dinlemeye başlayabilirsiniz.
Kırmızının ritmi
Kırmızı, yanıp sönen LED ışıklar, müziğinizin ritmine tepki vererek sisteminize atmosferik ve sinematik bir kalite katar.
USB ile güç
Priz gerektirmez sadece USB bağlantı noktası üzerinden bağlanın ve hazır olun.
product-specifications
Özellikler
General
Type of speaker
2.0
Features
Power saving
no
NFC
no
Hands-free phone calls
no
Tripod mount
no
Special features
Red LED illumination on speaker beat synced
Size & Weight
Total weight
1000 g
Weight of main unit
1000 g
Depth of main product (in mm)
125 mm
Width of main product (in mm)
90 mm
Height of main product (in mm)
195 mm
Control
Remote control
no
Controls
volume control, power on/off, lights on/off
Connectivity
Connection type
wired
Bluetooth
no
Cables included
fixed on speaker
Audio
Power output (peak)
20 W
Power output (RMS)
10 W
Frequency response
20 Hz - 20.000 Hz
Driver size
60 mm
Driver units
2
Audio input
3.5 mm
Audio output
None
Headphone connection
no
Microphone built-in
no
Microphone connection
no
Speaker impedance
4 Ohm
Input impedance
10000 Ohm
Lighting
Lights
yes
Protection
Waterproof
no
Power
Power cable detachable
no
Input
Power source
USB
Compatibility
Compatible Device Types
laptop, pc
Ekstra bilgi
Ürün numarası
23737
EAN-kodu
8713439237375
Garanti
1 yıl
Ambalajın içeriği
Kabloları takılı 2.0 hoparlör seti
Sistem gereksinimleri
3.5 mm ses bağlantısı
USB bağlantı noktası (güç için)
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
To install the speaker:
- Connect the speaker to the USB-port of the computer for power.
- Connect the speaker to the audio-port of the computer for sound.
- Switch the speaker on with the volume button on the front.
- Check if the speaker has been set as the default audio device in the Sound settings of the computer.
- The speaker is ready to use.
You switch the lighting on/off via the light on/off button that is located on the back of the speaker.
If you are experiencing audio issues on your Dell computer, make sure to install the latest audio drivers for your computer from the Dell website at https://www.dell.com/support/home/en-us?app=drivers
After you have installed the Dell software and drivers for your computer setup the software correctly to activate the audio devices:
1. Go to the Windows Start Menu and open the Dell Optimizer software.
2. Click the Audio button.
3. Toggle the Switch to ENABLED.
4. Toggle the NOTIFICATIONS on.
5. Disable the Audio page and close the application.
6. When plugin the microphone, headset or headphones, the Optimizer will notify that a device is connected to the audio port. Select the correct device that is attached in the Optimizer option menu.
If this does not solve your problem, contact the Dell support or your system administrator.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.