Şu anda mevcut
PC & PS3 için Kablosuz Oyun Tablası
GXT 545 Yula
PC ve PS3 için Şarj edilebilir pil ve rahat oyun oynamanız sağlayan sağlama kavramaya sahip kablosuz oyun tablası
product-specifications
Özellikler
Features
Software
no
Control
Controls
directional pad
Number of buttons
13
Shoulder buttons
yes
Trigger buttons
yes
Pressure sensitive buttons
yes
Analogue stick
yes
Turbo fire
no
Vibration
vibration feedback
x-input / direct input
x-input, d-input
Connectivity
Connection type
wireless
USB version
1.0
Wireless range
10 m
Wireless receiver included
yes
Audio
Built-in speaker
no
Headphone connection
no
Power
Batteries included
no
Rechargeable battery
yes
Battery life (hours)
4 hours - 8 hours
Input
Power source
battery, micro-USB
Compatibility
Compatible Device Types
pc, laptop, gaming console
Compatible Consoles
PS3
Compatible Software Platforms
Windows
Installation
Driver needed
no
Size & Weight
Total weight
204 g
Depth of main product (in mm)
110 mm
Width of main product (in mm)
150 mm
Height of main product (in mm)
65 mm
Ekstra bilgi
Ürün numarası
20491
EAN-kodu
8713439204919
Garanti
1 yıl
Ambalajın içeriği
Dahili pilli oyun tablası
USB alıcı
USB şarj kablosu
Kullanıcı kılavuzu
Oyun Etiketi
Sistem gereksinimleri
Windows 10, 8, 7 yüklü PC / Laptop
PlayStation 3
USB girişi
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
This gamepad does not need a special driver to function. The support for this product is already built into Windows.
Steps to follow to install the gamepad:
- First fully charge the gamepad with the charging cable. When the gamepad is charging the light will be blinking. When the gamepad is fully charged the light will be off.
- When the gamepad is fully charged, connect the USB-receiver to the computer
- Click the ON-button
- Go to the Game controller settings to configure the gamepad
- The gamepad is ready for use.
When playing a game, make sure to select the correct input mode for the game.
A switch is located on the back of the gamepad, with this switch you can change the input mode from X-Input to DirectInput.
It is possible to connect more controllers to one PC, but this depends on the operating system of your pc and the game(s) you play. So please check these requirements before trying to install several controllers on one computer.
This gamepad doesn't have a shutdown button and the way to turn it off completely is to disconnect the USB-receiver.
On the other hand, if you wish, you can also leave the USB-receiver constantly connected to the PC and when the PC is turned off or enters standby after some time of inactivity, the gamepad will also turn off. This is the recommended, but not mandatory, option.
When the gamepad is charging the light will be blinking.
When the gamepad is fully charged the light will be off.
The 4 LEDs have two functions;
- to indicate which controller number you are using (number 1, 2, 3 or 4)
- to indicate battery:
- If the four lights are lit, it means your controller is fully charged.
- If the LEDs are blinking, it is because the battery level is very low.
The vibration feedback depends on the type of game, the controller doesn't have a switch to turn the vibration on or off.
It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.
Test the various scenarios, as described below, to narrow down and eliminate possible causes.
Continue testing and vary only one thing at a time.
- distance: make sure you are close enough to the receiver. It may seem simple and possibly not be the issue, but that must be proven or disproven one way or another.
- battery: is the battery fully charged?
- location: when using a receiver, try to move the receiver to another location, preferably from behind the device you are using our product on.
- interference: are wireless devices such as a router or wireless speaker close by? Other wireless devices can cause interference.
- up-to-date: Is the device you are using our product on up-to-date? E.g. is Windows up-to-date, are the USB-drivers up-to-date, etc.
- device: does it happen also when you use our product on another device?
A switch is located on the back of the gamepad, with this switch you can change the input method from X-Input to DirectInput.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
This gamepad has been designed for use with Windows computers and PS3 only, not with any other devices or systems.
X-input is the input standard for newer games for the Windows operating systems and is used by most of the latest games that support the use of a gamepad. If the game supports X-input, the gamepad is used in X-input mode.
DirectInput is an older input standard for gaming and is used by most older games that support the use of a gamepad.If the game supports Directinput, the gamepad is used in DirectInput mode.
For correct use the gamepad switch must be set according to the input that the game specifies: X-input or DirectInput mode.
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.