Bu "eski" bir üründür ve geçerli Trust ürün grubu içinde artik yer almamaktadir.
Aydınlatmalı subwoofer hoparlör seti ile 2.1 ses çubuğu
GXT 668 Tytan
- Şık yatay hoparlör ve The Division 2 oyun kuponu (standart sürüm) ile birlikte PC, oyun konsolu ve TV için 2.1 hoparlör seti
product-specifications
Özellikler
General
Type of speaker
2.1
Features
Power saving
yes
NFC
no
Hands-free phone calls
no
Tripod mount
no
Special features
- Illumination pulsing on music in sub
- Including 4 EQ presets
- Touchpanel ontop of soundbar
- LED can be turned on/off
- Comes including mounting solution
Size & Weight
Total weight
4750 g
Control
Remote control
wireless
Controls
bass, on/off, sound mute, volume control, LED
Connectivity
Connection type
wired
Bluetooth
no
Cables included
Yes
Cable length power cable
140 cm
Cable length subwoofer to satellite cable
180 cm
Audio
Power output (peak)
120 W
Power output (RMS)
60 W
Power output - subwoofer (RMS)
30 W
Power output - satellite (RMS)
30 W
Frequency response
36 Hz - 20.000 Hz
Audio input
3.5 mm
Headphone connection
no
Microphone built-in
no
Microphone connection
no
Speaker impedance
12 Ohm
Lighting
Lights
yes
Protection
Waterproof
no
Power
Power cable detachable
no
Input
Power source
wall socket
Subwoofer
Subwoofer Height (mm)
252 mm
Subwoofer Width (mm)
252 mm
Subwoofer Depth (mm)
236 mm
Soundbar
Soundbar Height (mm)
72 mm
Soundbar Width (mm)
485 mm
Soundbar Depth (mm)
66 mm
Compatibility
Compatible Device Types
pc, laptop, gaming console, smarttv
Compatible Consoles
Xbox One, PS4 Pro, PS4 Original, PS4 Slim, PS3, Wii, Xbox 360
General compatibility
any device with 3.5mm audio output, or SP/DIF (PCM only)
Ekstra bilgi
Ürün numarası
23362
EAN-kodu
8713439233629
Garanti
1 yıl
Ambalajın içeriği
Ses kablosu takılı ses çubuğu
Subwoofer
Güç kablosu
3,5mm kablo
Optik kablo
Kablosuz uzaktan kumanda
Kullanım kılavuzu
Oyun etiketi
The Division 2 standart sürüm kupon (promosyon bitiş tarihi: 19.03.2020 - yalnızca EMEA bölgesi)
Sistem gereksinimleri
3.5 mm ses çıkışı
veya optik çıkış bağlantısı olmayan konsollar (S/PDIF PCM 2.0 çıkış)
Duvar prizi bağlantısı // 100-240V – 50/60hz
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
You connect the headphones via the AUX connection on the back.
Your speaker set will go into Standby mode if it doesn’t detect audio input after a specific amount of time.
This speaker set uses a fixed threshold input level to enable the smart power management feature. This means if you greatly lower the volume your speaker set might interpret this as silence and go into Standby mode.
To avoid this from happening, turn up the volume as high as it can go without distortion setting in, and use the volume controls on your speaker set to determine how loud (or soft) you want your audio.
Please note that some computers won't let attached devices resume from standby-mode due to configuration, the speaker set then has to be switched on manually.
-
Make sure the subwoofer volume knob is turned up (not set to zero).
-
Check cable connections of subwoofer.
-
Check connection of speaker to soundcard (colors of connectors must match colors connectors PC-side)
Follow the steps in the trouble shooting guide.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.