Şu anda mevcut
Maxo
HP için 90W Dizüstü bilgisayar şarj aleti
HP dizüstü bilgisayarlar için tasarlanmış 90W Dizüstü bilgisayar şarj aleti
Is this charger compatible with my laptop?
HP dizüstü bilgisayarlar için tasarlandı
Maxo dizüstü bilgisayar şarj cihazı, kurulum gerektirmeden cihazınıza sorunsuz bir şekilde bağlanan çeşitli şarj girişleriyle HP dizüstü bilgisayarlar için özel olarak tasarlanmıştır.
Destek seçenekleri
Temel Özellikler
Akıllı tasarım
Akıllı koruma sistemi, dizüstü bilgisayarınızın aşırı yüklenmeye ve kısa devreye karşı güvende olmasını sağlarken dayanıklı ve enerji açısından verimli tasarım, gereksiz güç kullanımını ve aşırı ısınmayı önler.
Küçük boyut, uzun şarj
Kompakt tasarım daha az dağınıklık yaratır, daha fazla alan sunar ve seyahat halindeyken mükemmel taşınabilirlik sağlar.
Kullanın, sarın ve saklayın
3 metrelik kablo, istediğiniz yerde oturup şarj etme imkanı sunarken, toplama bantları dolaşmaları önler ve kolay saklamaya olanak tanır.
product-specifications
Özellikler
General
Number of USB ports
0
Features
Number of tips/connectors included
4
Free Tip / Connector Service available
yes
Size & Weight
Total weight
430 g
Weight of main unit
430 g
Depth of main product (in mm)
33 mm
Width of main product (in mm)
55 mm
Height of main product (in mm)
118 mm
Connectivity
Cable length power input
120 cm
Cable length power output
180 cm
Protection
Protections
over-charge, over-current, over-heat, over-load, short-circuit
Input
Power plug type
EU
Power source
wall socket
Input power
100-240V~50/60Hz 1A
Output
Voltage setting
fixed
Output voltage
19.5
Max output amperes
4.74 A
Total max output power (W)
90 Watt
Mains socket
Power cable length
120 cm
Compatibility
Laptop voltage range
18 V - 20 V
Compatible Device Types
laptop
Compatible Brands
HP
Other
Power Factor Control
no
Ekstra bilgi
Ürün numarası
23393
EAN-kodu
8713439233933
Garanti
1 yıl
Ambalajın içeriği
Güç kablosu ve kablo ucu ile takılan dizüstü bilgisayar şarj cihazı
3+1 değiştirilebilir uç
Kullanım kılavuzu
Sistem gereksinimleri
Duvar prizi bağlantısı
18-20 Volt ve 90 W veya daha az güç gerektiren, HP dizüstü bilgisayar
Dosyalar
Dosyalar
manuals
Kullanma kılavuzlarını
Versiyon 2.0 | Çok dilli
Hızlı kurulum kılavuzu
Versiyon 1.0 | Çok dilli
Ekler
Uyumluluk bilgileri
Versiyon 1.0 | Çok dilli
Uyumluluk bilgileri
compliance
EU declaration of conformity (DoC)
Versiyon 1.0 | Çok dilli
EU declaration of conformity (DoC)
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
If the correct connector for your laptop model is the connector P (or P/B) according to our advisor, then you don't need an extra connector. This connector is the one that is attached to the charger cable and is also the base for the rest of connector tips.
You should not use any of the connectors available in the package, but connect the charger directly to your laptop, since the charger comes already with this connector attached to the end of the cable.
in case you have a charger with a manual voltage selector: you may need to adjust the voltage of your charger, if the charger doesn't charge your laptop.
The following connectors are included: P, BA2, K, T (P is connected to the base).
This is normal for a laptop charger.
Put the charger on the ground under your desk/table with sufficient ventilation.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
There is no connector with a USB-C connection available for our regular chargers.
For USB-C a different type of charger, a USB-C charger, is required.
This laptop charger is compatible with a HP laptop that requires 18-20 Volt and 90W power or less. Check full compatibility at https://www.trust.com/23393/compatibility
spareParts
Yedek parçalar
Yedek parçalar
In case of a laptop connector: First check via the Advisor which connector is needed. Then if the connector is missing from the package, or broken, use the form to request this connector.
Standard processing time, from the moment the request is send to the time that the part is delivered, is 1-2 weeks, depending on the location of the shipment address and the availability of the item(s).
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.