60W Taşınabilir Kablosuz Parti Hoparlörü
Şarj edilebilir pil ve RGB ışıklı taşınabilir kablosuz parti hoparlörü
özellikler
General
Features
Control
Connectivity
Audio
Lighting
Protection
Power
Input
Compatibility
Ekstra bilgi
Hoparlör
Aux kablosu
Mikro-USB şarj kablosu
Kullanım kılavuzu
Bluetooth veya 3.5mm’lik aux bağlantılı müzik çalar (telefon/tablet/bilgisayar/mp3 çalar)
USB şarj aleti (pili şarj etmek için)
Sıkça Sorulan Sorular (FAQ)
Kurulum ve yapılandırma
- Fully charge the speaker. This will take 5-10 hours depending on the power source. The indicator is red when charging, the indicator will switch off when the speaker is fully charged.
- When the speaker is fully charged, switch the speaker on with the on/off button. The indication bt will start to flash.
- Go to to the Bluetooth section of the device you are trying to pair to and select TRUST PARTY SPEAKER in the list to pair the speaker to the device. The indication bt stop flashing and remain fixed when the pairing is successful.
- The speaker is ready for use.
Kullanımı
To play music via USB or SD-card, you have to use a fat32 formatted card, with max. 32GB, with mp3 audio files.
You switch the lighting on/off by pressing the light button for several seconds.
If the lighting is not already on, you first switch the lighting on by pressing the light button for several seconds.
Then you can change the colour by pressing the light button 1x. It will switch from red to green to blue.
You can pair two Klubb Go speakers.
You cannot pair the Klubb Go to a different type of speaker.
Press the RED/DEL button on 1 of the speakers for several seconds, the indication will state BT_A.
Press the RED/DEL button on the other speaker for several seconds, the indication will state BT_B.
The 2 speakers are linked together.
These are shortcuts for tracks on SD-card/USB-stick. With these buttons you can select tracks on a SD-card or USB-stick.
Note: In Bluetooth mode, these buttons will not function.
Sorunlarını çözme
Make sure you have set the correct mode (bt, line, usb, sd) with the mode-button.
Note: The number (1-2-3-4-5-6-7-8-9-0) buttons and the shuffle button will not function in Bluetooth mode.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.