Este producto no está disponible en el surtido actual de Trust.
ZLED-TUNE9
Bombilla LED inteligente ajustable
Cree un ambiente cálido o frío con esta bombilla inteligente ZigBee controlable de forma inalámbrica
product-specifications
Especificaciones
Size & Weight
Width of main product (in mm)
60 mm
Height of main product (in mm)
110 mm
Control
Light control
ON/OFF, Dimming
Lamp
Lamp fitting type
E27
Light colour
2200-6500K
Colour rendering index
83
Energy class
A+
Light beam angle
270 degrees
Dimming range
10 - 100 %
Max Light intensity
806 Lumen
Max switch cycles
100.000
Warm-up time to 60% light
0 s
Life time
20000 hours
Electronic
Power input type (W)
9 W
Input frequency of main device
50 Hz, 60 Hz
Input voltage of main device
230 V
Connectivity
Wireless protocols
Zigbee
Wireless range
30 m
Zigbee
Zigbee standard
ZLL (Zigbee Light Link)
Power
Wireless transmission power (dBM)
2.5 dBM
Compatibility
Google assistant compatible
yes
Philips Hue application
yes
Philips Hue entertainment
no
Philips Hue Over-the-Air Updates
no
Apple Homekit
no
Información extra
Número de referencia
71156
Código EAN
8713439711561
Garantía
1 año
Contenido del paquete
Bombilla LED inteligente ajustable
Manual
Requisitos del sistema
Portabombillas E27 estándar
Mando a distancia Trust Smart Home ZigBee o una estación de control Trust como Z1 ZigBee Bridge o ICS-2000 (u otro dispositivo con certificación ZigBee Light Link como Philips Hue)*
230 V – 50/60 Hz
faq
FAQ
Preguntas frecuentes (FAQ)
Switch the lamp ON and OFF five times with the traditional switch. After that, the lamp will be in pairing mode for 20 seconds. Then connect the Zigbee lamp with the Z1, ICS-2000 or ZYCT-202 Remote control. (Check the manual of the Z1, ICS-2000 or the ZYCT-202 Zigbee remote on how to connect it with a lamp)
Yes, but the remote is restricted to only switching and dimming the lamps. To control warm-, cold- or RGB-colors you need the ICS-2000 or Zigbee Z1.
To control the bulbs using your smartphone, you need an ICS-2000 or a Z1 and you have to pair the Zigbee bulbs. After that, you can control you Zigbee devices with your phone.
Yes, that is possible and won't give any further issues.
As long as you keep the lamp safe from humidity you can use them outdoor.
Notice: Metal parts around a closed lamp can influence the wireless range.
You can't place our Zigbee bulbs behind an existing dimmer, since the bulbs have a built in dimmer themselves.
The ZLED bulbs can not be used with all transmitters. They can only be controlled with a transmitter that is compatible with Zigbee. You can recognise them by the 'Z' at the beginning of the product name, e.g. ZYCT-202, ZPIR-8000, ZCTS-808, etc)
With the ZYCT-202 remote control you can pair multiple lamps to a channel/group. After that, you can control all lamps in this group together. With the ICS-2000 and the Z1 this is not yet possible, but it will be in the future.
The Zigbee lamps can also be used with the ZYCT-202 Zigbee Remote (only switching and dimming)
You can do this by resetting the bulb or by pressing ON and OFF on the Zigbee remote at a maximum distance of 10cm from the bulb.
A couple of tips for optimal range:
- Make sure your Zigbee control station is placed at a central point in your home or room.
- Make sure there are no metal objects in close range of your Zigbee control station.
- Make sure your Zigbee control station is completely detached and there is enough distance (minimum 1 meter) between the Zigbee control station and other devices such as a Wifi router, Dect phones (Gigaset) etc.
- If you add multiple Zigbee lamps or devices, they will amplify each others signal (this is called mesh networking)
- If neccessary, our support department can help you with setting a different Zigbee channel to reduce disturbance with your Wifi network. The range of the Zigbee system is max. 30 metres in optimal conditions.
No, this is not possible. When you connect a Zigbee light to, for example, our Zigbee Bridge Z1, the connection with the original control station is undone.
Yes, that is possible. First pair the lamp and the remote with your Trust Smart Home Zigbee Z1 or ICS-2000 and after that connect the lamp and the remote.
Max 20 lamps with a maximum of 4 per channel.
With a Trust Smart Home control station or bridge it is possible to control your lamps even when you are not at home
Turn the ZLED Zigbee lamp OFF and ON again and make sure to hold the remote as close as possible to the lamp while pairing.
Make sure that the remote control isn't set to the smart group function/
- Push the ON button on the remote.
- Keep the ON button pressed untill the lamp turns on and off 3x. (This can take up to 20 seconds.)
- Keep holding the ON button untill the lamp has flashed 2x to confirm the connection, then release the ON button.
Make sure you hold the transmitter close to the lamp when trying to pair. The range of the bulb will expand after it is paired.
You can reset the bulb by putting it in pairing mode. Turn the lamp ON and OFF five times within 15 seconds with the traditional switch. The lamp will be in pairing mode for 20 seconds after that.
Si el producto todavía está en garantía, le rogamos ir al punto de venta donde lo ha adquirido, provisto de una prueba de compra. Allí se lo reemplazarán por uno nuevo.
En caso de defectos, devuelva el producto a su revendedor con una descripción del fallo, prueba de la compra y todos los accesorios.
Durante el periodo de garantía recibirá un producto de repuesto del revendedor si hubiera disponibles.
Para nuestras condiciones de garantía puede consultar:
https://www.trust.com/support/warranty
This is possible when using the ICS-2000 Control Station. Create a rule that has the Start Line receiver as a trigger and turning ON a Zigbee lamp as action.
Zigbee is a 2-way system, allowing you to see the status of your lights in our app. Apart from that, Zigbee uses mesh networking. If you use multiple lamps or other Zigbee devices, they amplify each others signal.
supportMail
Contacta con nosotros
Contacta con nosotros
Por favor, consulte primero nuestras Preguntas frecuentes, es probable que encuentre la respuesta allí.
¿No pudo encontrar la respuesta en las preguntas frecuentes? Complete el formulario a continuación con la mayor cantidad de información posible y uno de nuestro personal del servicio de asistencia responderá lo antes posible. Nuestros mensajes son contestados en el orden en que son recibidos.
Después de enviar el formulario, aparecerá un mensaje de confirmación con su número de referencia. Esta confirmación también se ha enviado a su dirección de correo electrónico al mismo tiempo. Si no ha recibido este mensaje, revise su carpeta de correo no deseado. Si tampoco puede encontrar la confirmación allí, envíe el formulario nuevamente con su dirección de correo electrónico correcta.