Şu anda mevcut
Işıklı Oyun Kulaklığı
GXT 448 Nixxo
Kuvvetli ses ve LED aydınlatmalı yanları ile zarif oyuncu kulaklığı
Muhteşemlik için Tasarlandı
Yepyeni tasarımıyla Trust GXT 488 Nixxo kuvvetli sesi havalı bir görünüm ile birleştirir. 50 mm sürücülerden LED aydınlatmalı yanlarına kadar her şey sadece muhteşemlik düşünülerek tasarlanmıştır.
Temel Özellikler
Sesinizi Duyurun
Trust Nixxo'nun büyük 50 mm sürücüleri kuvvetli bir ses sağlayarak oyun sırasında her şeyi duymanızı sağlar. Tabii ki de sesinizi duyurmanız, duymanız kadar önemlidir. Katlanabilir, esnek mikrofon takım arkadaşlarınızla kolayca konuşmanızı sağlar.
Havalı Kalın
Nixxo'nun tarz sahibi tasarımı sayesinde, arkadaşlarınızın arasındaki herhangi LAN partisi veya oyun gecesinde göz alacaksınız. LED aydınlatmalı yanlar bu oyun kulaklığına özgün bir görünüş verirken, büyük kulak üstü pedler ve yumuşak kafa bandı sadece iyi görünmekle kalmaz, aynı zamanda Nixxo'yu konforlu hale getirirler.
Bağlanırlık
GXT 448 Nixxo'yu kullanması aşırı kolaydır. Sadece dizüstü bilgisayarınızdaki 3,5 mm AUX kablosuna takın ve kullanmaya başlayın. LED aydınlatmalara USB kablosunu takarak güç verilir ve eğer kulaklığı bir iki farklı ses bağlantısı kullanan bir bilgisayara takmanız gerekiyorsa, Nixxo bir Y ayracı ile birlikte gelir. Entegre kontrol aparatı ile sesi ayarlayabilir ve mikrofonu susturabilirsiniz, bu sayede ses deneyiminiz üzerinde tam kontrol sahibi olursunuz.
product-specifications
Özellikler
Features
Noise reduction
no
Background noise reduction
no
Software
no
Accessories
2x 3.5mm adapter cable
Special features
LED lights
Foldable
no
Size & Weight
Total weight
430 g
Weight of main unit
350 g
Depth of main product (in mm)
98 mm
Width of main product (in mm)
230 mm
Height of main product (in mm)
204 mm
Control
Remote control
inline
Controls on earcap
no
Controls
mute, volume
LED indicators
no
Connectivity
Connection type
wired
Bluetooth
no
Connector type
3.5mm
Connector style
straight
Cable style
nylon braided
Cable detachable
no
Cable length main cable
230 cm
Audio
Sound reproduction
Stereo
Audio channels
2.0
Frequency response
20 Hz - 20.000 Hz
Driver size
50 mm
Driver units
2
Microphone
yes
Detachable microphone
no
True Wireless Stereo (TWS)
no
Impedance
25 Ohm
Sensitivity
112 dB
Headphone
Adjustable headband
yes
Earcup type
over-ear
Ear-cup material
synthetic leather
Ear-cap construction
closed-back
Swivel earcups
no
Rotating earcups
no
Output channels
2
Magnet type
Neodymium
Active Noise Cancelling
no
Total harmonic distortion
5 %
Ear-cap contact pressure
normal
Microphone
Sensor type microphone
dynamic
Pick-up pattern
Omnidirectional
Frequency response microphone
100 Hz - 10.000 Hz
Echo cancellation
no
Gaming
Designed for gaming
yes
Lighting
Lights
yes
Light type
LED
Input
Power source
USB
Compatibility
Suitable for
Gaming
Compatible Device Types
laptop, pc
Compatible Software Platforms
MacOS, Windows
Ekstra bilgi
Ürün numarası
24030
EAN-kodu
8713439240306
Garanti
1 yıl
Ambalajın içeriği
Kulaklık seti
Adaptör kablosu
Kullanım kılavuzu
Sistem gereksinimleri
USB portu (güç için)
Kombine 3,5mm kulaklık/mikrofon
YA DA
3,5 mm kulaklık bağlantısı
3,5 mm mikrofon bağlantısı
Dosyalar
Dosyalar
Uyumluluk bilgileri
Versiyon 1.0 | Çok dilli
Uyumluluk bilgileri
compliance
EU declaration of conformity (DoC)
Versiyon 1.0 | Çok dilli
EU declaration of conformity (DoC)
faq
FAQ
Sıkça Sorulan Sorular (FAQ)
This instruction video applies to all our gaming headsets with 3.5mm jack connector type
- Connect the headset to the audio connection of your device.
Note: If your computer has two separate audio connections, use the included adapter. - Set the headset as the default device, for both input and output in the sound settings.
- Optional: Connect the headset to the USB-port for power, to activate the lighting.
- Use the buttons on the inline remote to adjust the volume, and to mute/unmute the microphone.
- The headset is ready to use.
If you are experiencing audio issues on your Dell computer, make sure to install the latest audio drivers for your computer from the Dell website at https://www.dell.com/support/home/en-us?app=drivers
After you have installed the Dell software and drivers for your computer setup the software correctly to activate the audio devices:
1. Go to the Windows Start Menu and open the Dell Optimizer software.
2. Click the Audio button.
3. Toggle the Switch to ENABLED.
4. Toggle the NOTIFICATIONS on.
5. Disable the Audio page and close the application.
6. When plugin the microphone, headset or headphones, the Optimizer will notify that a device is connected to the audio port. Select the correct device that is attached in the Optimizer option menu.
If this does not solve your problem, contact the Dell support or your system administrator.
First make sure the headset is connected correctly to the computer.
- Without the adapter; when your computer has a combined audio port.
- With the adapter; if your computer has 2 separate audio ports.
Then switch the microphone on with the button on the in-line remote.
And make sure that both the headset and the microphone are selected as the default audio device (input and output) on the computer.
On Windows 10: verify that the microphone is allowed to be used by applications in the Privacy Settings.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Bize Ulaşın
Bize Ulaşın
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.