Currently available
Verro
Ergonomic Wireless Mouse
Wireless mouse with ergonomic vertical design to reduce arm and wrist strain
product-specifications
Specifications
General
Formfactor
standard
Ergonomic design
yes
Height of main product (in mm)
137 mm
Width of main product (in mm)
74 mm
Depth of main product (in mm)
68 mm
Total weight
115 g
Weight of main unit
113 g
Features
DPI adjustable
yes
Silent click
no
Vertical angle
60 deg
Gliding pads
teflon
Software
no
USB receiver storable
yes
Special features
Vertical Ergonomic Wireless Mouse
Power saving
yes
Sensor
DPI
1200, 1600, 600
Max. DPI
1600 dpi
Sensor technology
optical
Control
Grip type
palm
Left-right handed use
right-handed
Scroll wheel
yes
Trackball
no
Horizontal scrolling
no
Controls
left, right, mid, dpi loop, forward, backward, on/off
Number of buttons
6
DPI button
yes
On/off button
yes
Programmable buttons
no
Adjustable weight
no
Suitable surface
non-reflective flat surface
Indicators
Charging, Battery empty
Connectivity
Connection type
wireless
Bluetooth
no
USB version
2.0
Connector type
USB-A male
Wireless range
10 m
Wireless protocols
RF 2.4GHz
USB receiver included
yes
Gaming
Designed for gaming
no
Lighting
Lights
no
Power
Batteries included
yes
Rechargeable battery
no
Number of batteries
1
Battery type (AA, AAA, etc.)
AA
Battery life (months)
3 month
Wireless transmission power (mW)
1 mW
Input
Power source
battery
Compatibility
Compatible Device Types
pc, laptop
Compatible Software Platforms
Windows, Chrome OS, Mac OS
Extra information
Item number
23507
EAN code
8713439235074
Warranty
1 year
Package contents
Wireless mouse
USB micro-receiver
1x AA battery
System requirements
Windows 10, 8 or 7
Intel-based Mac with Mac OS X 10.5 (Leopard) or higher
Chrome OS
USB port
faq
FAQ
Frequently Asked Questions (FAQ)
To install the mouse:
- Remove the cover on the bottom of the mouse
- Place a full battery in the mouse
- Remove the USB-receiver from the mouse
- Close the cover on the bottom of the mouse
- Place the USB-receiver in a USB-port of the computer
- Switch the mouse on with the button on the bottom of the mouse
- The computer will recognize the mouse and install the mouse to the computer, this might take a few moments
- The mouse is ready to use
You can switch the mouse off / on with the button on the bottom.
However, this mouse uses standby (sleep) mode to save battery power.
There is no need to switch it off.
When the mouse is not moving or there is no signal from the USB receiver, it will turn sleep-mode on, to save battery power.
When you use the mouse again, e.g. (depending on the type of mouse) by pressing a button, or by moving the mouse, it will switch on again.
For storage or travelling we would suggest to switch the mouse off.
When you press the dpi button the indicator will light up to indicate the selected dpi setting:
600 dpi: 1x
1200 dpi: 2x
1600 dpi: 3x
If the battery is low, the indicator will light up (without pressing the dpi button. If the indicator lights up when pressing the dpi button, this indicates the dpi setting).
Follow the steps in the mouse settings page
This mouse uses a generic driver of Windows, which doesn't provide a possibility to adjust button functions.
However, you can try with software which is available on internet to configure the buttons.
http://www.highrez.co.uk/downloads/XMouseButtonControl.htm
Please note that this solution is not official, as there is no Trust software available for programming the buttons, and therefore it is not supported, nor is proper functioning of the software guaranteed.
Depending on the version of your mouse, the receiver is stored either inside the product (bottom) itself, or inside the battery compartment of the mouse.
It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.
-
Try using the mouse on a different surface or use a mousepad.
-
Clean the sensor on the bottom of the mouse with a dry cloth.
-
Improve wireless performance.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Contact us
Contact us
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.