2.1 Speaker set
Powerful 2.1 subwoofer speaker set to listen to audio from PC, tablet, phone or any other audio device
Specifications
General
Features
Control
Connectivity
Audio
Lighting
Protection
Power
Input
Compatibility
Satellites
Subwoofer
Extra information
Subwoofer
2x satellite speakers with cables attached
Wired remote
Power cable
Cinch adapter cable
User guide
Audio device with a 3.5mm connection
Wall power connection
Other versions
EAN code 8713439202458
Frequently Asked Questions (FAQ)
Installation and configuration
To install the speaker set:
- Connect the satellites to the subwoofer.
- Connect the subwoofer to a wall power outlet.
- Connect the remote control to the subwoofer and to the computer.
- Switch the subwoofer on.
- Turn the volume on the remote higher.
- Turn the volume and bass on the subwoofer higher.
- Make sure that the speaker is set as the default audio device in the Sound Settings/Preferences of the computer.
Usage
Your speaker set will go into Standby mode if it doesn’t detect audio input after a specific amount of time.
This speaker set uses a fixed threshold input level to enable the smart power management feature. This means if you greatly lower the volume your speaker set might interpret this as silence and go into Standby mode.
To avoid this from happening, turn up the volume as high as it can go without distortion setting in, and use the volume controls on your speaker set to determine how loud (or soft) you want your audio.
Please note that some computers won't let attached devices resume from standby-mode due to configuration, the speaker set then has to be switched on manually.
When resuming the audio playback it takes about 1-2 seconds before the speaker is active again.
Please note that some computers won't let attached devices resume from standby-mode due to configuration, the speaker then has to be switched on manually.
After about 60 minutes of no sound (silence) the speaker enters its power saving mode.
Increase the volume of the source (computer, laptop, tablet, smartphone, etc) and decrease the volume of the speaker to the desired volume.
ErP is a legislation from the EU, setting eco requirements to Energy Related Products.
These requirements are intended to reduce (standby) power consumption and in general reduce energy losses.
Solving problems
-
Make sure the subwoofer volume knob is open.
-
Check cable connections of subwoofer.
-
Check connection of speaker to soundcard (colors of connectors must match colors connectors PC-side)
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
Contact us
Contact us
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.