It is possible to connect more controllers to one PC, but this depends on the operating system of your pc and the game(s) you play. So please check these requirements before trying to install several controllers on one computer.

This gamepad doesn't have a shutdown button and the way to turn it off completely is to disconnect the USB-receiver.

On the other hand, if you wish, you can also leave the USB-receiver constantly connected to the PC and when the PC is turned off or enters standby after some time of inactivity, the gamepad will also turn off. This is the recommended, but not mandatory, option.

When the gamepad is charging the light will be blinking.
When the gamepad is fully charged the light will be off.

The 4 LEDs have two functions;

• to indicate which controller number you are using (number 1, 2, 3 or 4)
• to indicate battery:
  • If the four lights are lit, it means your controller is fully charged.
  • If the LEDs are blinking, it is because the battery level is very low. 

The vibration feedback depends on the type of game, the controller doesn't have a switch to turn the vibration on or off.

It's not possible to provide a replacement receiver for this product.
This is due to the fact that during production the product and receiver receive a unique code, so the product can only communicate with the bundled original receiver.

Test the various scenarios, as described below, to narrow down and eliminate possible causes. 

Continue testing and vary only one thing at a time.

• distance: make sure you are close enough to the receiver. It may seem simple and possibly not be the issue, but that must be proven or disproven one way or another.
• battery: is the battery fully charged?
• location: when using a receiver, try to move the receiver to another location, preferably from behind the device you are using our product on.
• interference: are wireless devices such as a router or wireless speaker close by? Other wireless devices can cause interference.
• up-to-date: Is the device you are using our product on up-to-date? E.g. is Windows up-to-date, are the USB-drivers up-to-date, etc.
• device: does it happen also when you use our product on another device?

A switch is located on the back of the gamepad, with this switch you can change the input method from X-Input to DirectInput.

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

This gamepad has been designed for use with Windows computers and PS3 only, not with any other devices or systems.

X-input is the input standard for newer games for the Windows operating systems and is used by most of the latest games that support the use of a gamepad. If the game supports X-input, the gamepad is used in X-input mode. 

DirectInput is an older input standard for gaming and is used by most older games that support the use of a gamepad.If the game supports Directinput, the gamepad is used in DirectInput mode.

For correct use the gamepad switch must be set according to the input that the game specifies: X-input or DirectInput mode.