Available in stores now
Miro
Compact Bluetooth® speaker
Compact Bluetooth® speaker, perfect for travel and outdoor use
product-specifications
Specifications
General
Type of speaker
Single unit
Height of main product (in mm)
43 mm
Width of main product (in mm)
100 mm
Weight of main unit
185 g
Features
NFC
no
Hands-free phone calls
yes
Tripod mount
no
Accessories
micro-USB charge cable, 3.5mm audio cable
Power saving
yes
Control
Remote control
no
Controls
volume control, power on/off, play controls, mode, voice assistant
Connectivity
Connection type
wireless, wired
Bluetooth
yes
Cables included
Yes
Wireless range
10 m
Bluetooth version
5.0
Audio
Power output (peak)
10 W
Power output (RMS)
5 W
Frequency response
20 Hz - 20000 Hz
Driver size
52 mm
Driver units
1
Speaker impedance
4 Ohm
Input impedance
10000 Ohm
Audio input
3.5 mm, Bluetooth
Audio output
None
Headphone connection
no
Microphone built-in
yes
Microphone connection
no
True Wireless Stereo (TWS)
yes
Lighting
Lights
no
Protection
Waterproof
yes
IP Code (International Protection Rating)
IPX7
Power
Rechargeable battery
yes
Number of batteries
1
Battery type (AA, AAA, etc.)
polymer
Battery composition (Alkaline, Li-ion, etc.)
Lithium-ion polymer
Battery capacity (Wh)
2.9 Wh
Battery capacity (mAh)
800 mAh
Battery voltage (V)
3.7 V
Battery life (months)
36 month
Max battery life - music
14 hours
Power cable detachable
yes
Input
Power source
battery, micro-USB
Compatibility
Compatible Device Types
Bluetooth devices
Extra information
Item number
23836
EAN code
8713439238365
Warranty
1 year
Package contents
Bluetooth speaker
Micro-USB charge cable
Strap cord
Aux cable
User guide
System requirements
Bluetooth device / Aux output (3.5mm)
Wall charger or USB port
faq
FAQ
Frequently Asked Questions (FAQ)
- Connect the speaker to a USB-charger, which is connected to a wall power outlet.
- Charging the speaker will take approx. 2 hours. The LED will be red when charging. When the speaker is fully charged the light will switch off.
- When the speaker has been fully charged, switch the speaker on by pressing the on/off button 1x.
- Start the pairing process by pressing 1x both the minus (-) and plus (+) buttons
- The LED on the speaker will flash when the speaker is in pairing mode.
- Go to the Bluetooth section on the device you are pairing to and select the TRUST MIRO to pair.
- The LED on the speaker will stop flashing when the speaker has been successfully paired.
- The Miro is ready for use.
You switch the input mode by pressing the M-button 1x (If you press it for 4 seconds, it will try to link to another Miro speaker instead).
You switch the speaker on/off by pressing the on/off button 1x.
You can pair two Miro speakers.
You cannot pair the Miro to a different type of speaker.
- Put the 2 speakers close together
- Press M-button for 4 seconds on the left speaker (If you press it 1x, it will switch the input mode instead).
- The 2 speakers are linked together.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
IPX7: Can be submerged up to 1 meter in water for 30 minutes.
supportMail
Contact us
Contact us
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.