Это «устаревшее» изделие выведено из ассортимента продукции компании Trust.
Zelos
Акустическая система 2.0 с поддержкой Bluetooth
Комплект современных мощных колонок 2.0 с поддержкой Bluetooth для ПК, ноутбука, планшета или смартфона
product-specifications
Технические характеристики
General
Type of speaker
2.0
Height of main product (in mm)
200 mm
Width of main product (in mm)
110 mm
Depth of main product (in mm)
85 mm
Features
Power saving
yes
Control
Remote control
no
Controls
volume
Connectivity
Connection type
wireless, wired
Cable length power cable
140 cm
Cable length audio cable
140 cm
Cable length satellite cable
100 cm
Audio
Power output (RMS)
20 W
Power output - satellite (RMS)
10 W
Frequency response
90 Hz - 19000 Hz
Speaker impedance
2 Ohm
Audio input
Bluetooth, 3.5 mm
Audio output
3.5 mm
Headphone connection
yes
Microphone built-in
no
Microphone connection
no
Protection
Waterproof
no
Power
Power cable detachable
no
Input
Power source
USB
Дополнительная информация
Артикул
22654
EAN-код
8713439226546
Гарантия
1 год
Комплект поставки
Комплект динамиков с кабелями
Руководство пользователя
Системные Требования
Кабель для подключения к разъему 3,5 мм или Bluetooth
USB-порт для питания
Скачать
Скачать
leaflets
Брошюры
Русский
Стандартный коммерческий буклет
Тип: pdf
Русский
Расширенный коммерческий буклет (не руководство)
Тип: pdf
Информация о соответствии
Версия 1.0 | Разноязычно
Информация о соответствии
faq
FAQ
Часто задаваемые вопросы (FAQ)
This product doesn't need a diver, it functions with the audio capability of the device it is connected to.
To install:
- Connect the USB-cable to the USB-port of the computer for power, or to a USB-charger that is connected to the wall power outlet
- Connect the audio cable to the 3.5mm audio port of the computer for sound
- Switch the speaker on with the button on the front
- Turn up the volume on the speaker as well as on the computer
- Set the speaker as the default audio device on the computer
- The speaker is ready to use (wired) or ready to be configured for wireless (see steps below)
To use with Bluetooth:
- Press the left button (the mode switch) on the front of the speaker.
- The speaker will go into pairing mode, the LED will flash blue
- Go to the Bluetoot section of the device you are trying to connect to
- Select TRUST ZELOS to pair to the device
- The speaker is ready to use (wireless)
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
As of iOS 11.2, when you are using a Bluetooth headphone and receive a phone call, the button that you use to pick-up the phone call, determines which device is used for the audio.
If you pick-up the phone call with the green button on the iPhone display, then all the audio will be handled by the iPhone microphone and speaker (and not with any connected Bluetooth device).
If you pick-up the phone call with the call pick-up button on the Bluetooth device (headphone or speaker), then all the audio will be handled by the Bluetooth device.
If the person that is calling you cannot hear you – or the other way around – it may be possible that you picked up the phone with one device and are talking via another.
Use the audio icon on the iPhone display during the phone call to change the audio device.
supportMail
Связаться с нами
Связаться с нами
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.