Это «устаревшее» изделие выведено из ассортимента продукции компании Trust.
Tytan
Акустическая система 2.1
Мощная акустическая система 2.1 с деревянным сабвуфером, пультом дистанционного управления и выходной мощностью 60 Вт RMS (120 Вт пиковой мощности)
product-specifications
спецификации
General
Type of speaker
2.1
Height of main product (in mm)
255 mm
Width of main product (in mm)
255 mm
Depth of main product (in mm)
240 mm
Total weight
4200 g
Features
NFC
no
Hands-free phone calls
no
Tripod mount
no
Power saving
yes
Control
Remote control
wired
Controls
power saving button, volume, bass
Connectivity
Connection type
wired
Bluetooth
no
Cables included
Yes
Cable length audio cable
175 cm
Cable length subwoofer to satellite cable
180 cm
Audio
Power output (peak)
120 W
Power output (RMS)
60 W
Power output - subwoofer (RMS)
40 W
Power output - satellite (RMS)
10 W
Frequency response
20 Hz - 20000 Hz
Driver size
150 mm
Driver units
3
Speaker impedance
4 Ohm
Input impedance
10000 Ohm
Audio input
3.5 mm, Line-in
Audio output
3.5 mm
Headphone connection
yes
Microphone built-in
no
Microphone connection
no
Lighting
Lights
no
Protection
Waterproof
no
Power
Power cable detachable
yes
Input
Power source
wall socket
Compatibility
Compatible Device Types
pc, laptop
General compatibility
any device with 3.5mm audio output
Compatible Consoles
no
Satellites
Satellite Height (mm)
200 mm
Satellite Width (mm)
100 mm
Satellite Depth (mm)
100 mm
Subwoofer
Subwoofer Height (mm)
255 mm
Subwoofer Width (mm)
255 mm
Subwoofer Depth (mm)
260 mm
Remote
Remote Height (mm)
70 mm
Remote Width (mm)
70 mm
Remote Depth (mm)
41 mm
Дополнительная информация
Артикул
23290
EAN-код
8713439232905
Гарантия
1 год
Комплект поставки
Сабвуфер
Две сателлитные колонки
Проводной пульт дистанционного управления
Кабель питания
Звуковой кабель
Руководство пользователя
Системные Требования
Аудиоразъем 3,5 мм
Подходит для розеток 100–240 В
faq
FAQ
Часто задаваемые вопросы (FAQ)
To use the speaker set:
(See the images in the manual for extra guidance.)
- Set-up
- Connect the subwoofer to the wall power outlet with the power cable (3).
- Connect the satellite speakers to the speakers ports (1) of the subwoofer
- Connect the remote to the input ports (2) of the subwoofer
- Connecting audio
Connect the remote to the 3.5mm connection of the device (e.g. the computer) - Controls
- Switch the speaker on with the on/off switch on the back of the subwoofer.
- Set the volume and bass with the button on the back of the subwoofer.
- Set the volume with the button on the remote.
- Installation on a computer
- Make sure to set the speaker as the default audio device on the computer
- Set the volume with the volume control on the computer.
When resuming the audio playback it takes about 1-2 seconds before the speaker is active again.
Please note that some computers won't let attached devices resume from standby-mode due to configuration, the speaker then has to be switched on manually.
After about 60 minutes of no sound (silence) the speaker enters its power saving mode.
Increase the volume of the source (computer, laptop, tablet, smartphone, etc) and decrease the volume of the speaker to the desired volume.
ErP is a legislation from the EU, setting eco requirements to Energy Related Products.
These requirements are intended to reduce (standby) power consumption and in general reduce energy losses.
-
Make sure the subwoofer volume knob is open.
-
Check cable connections of subwoofer.
-
Check connection of speaker to soundcard (colors of connectors must match colors connectors PC-side)
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
supportMail
Связаться с нами
Связаться с нами
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.