GXT 140 Manx

1. Charge the mouse by connecting it with the included cable to a USB-port of the computer. This will take approx. 3 hours.
2. Connect the USB-receiver (that will be stored inside the mouse) in a USB-port of the computer.
3. Switch the mouse on with the button on the bottom
4. The computer will recognize the mouse and install the built-in driver, this might take some moments.
5. The mouse is ready to use

This product doesn't need any drivers to function.
Just connect and the product should work.

By changing the dpi the colour of the LED will change.

Yes, it is possible to press multiple buttons simultaneously. 

Please note that this doesn't mean that all buttons can be pressed simultaneously, since this depends on the specific hardware of a mouse. Mice may have the hardware limitation that the thumb buttons can't be used together with left/right/mid click.

There is no battery indicator, but a charging indicator. It will turn red when charging, and will turn off when charging is finished.
Charge the mouse by connecting it with the included cable to a USB-port of the computer. Charging will stop when the mouse is fully charged.

Every colour is for a different DPI setting

• 600 = red
• 1000 = blue
• 1500 = green
• 2000 = yellow
• 2400 = turquoise
• 3000 = purple 

This mouse uses a generic driver of Windows, which doesn't provide a possibility to adjust button functions.

However, you can try with software which is available on internet to configure the buttons.

http://www.highrez.co.uk/downloads/XMouseButtonControl.htm

Please note that this solution is not official, as there is no Trust software available for programming the buttons, and therefore it is not supported, nor is proper functioning of the software guaranteed.

• Try using the mouse on a different surface or use a mousepad.
• Clean the sensor on the bottom of the mouse with a dry cloth.
• Improve wireless performance.

1. Uninstall all similar device drivers, previously installed on your computer.
2. Make sure your system is up to date following the instructions from the website www.windowsupdate.com.
3. Unplug the mouse and restart the system.
4. When Windows has completely loaded, connect the mouse directly to the USB port without using a hub or an extension cable.
5. Check in the Device Manager if the mouse is correctly installed or if there is any error message (visible by the yellow exclamation mark) reported.
6. If the above steps don't help, connect the mouse to another USB port or to another computer available to verify if the problem persists.

Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.

We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

Although our keyboards and mice are designed for use with computers, they can be used on PS4. However please note, most PS4 games do not support a keyboard and mouse.

When using a (wired) keyboard or mouse with a PS4, make sure it connects well with the PS4. If the PS4 has a connection on the back, connect the keyboard/mouse to the USB-connection on the back of the PS4. Or alternatively use an extension cable or USB hub.

You can use our mice and keyboards on the Xbox One.

Please note that Xbox One supports the use of mouse and keyboard in some games and apps, but it doesn’t work for every game or app. The game or app publisher must enable this feature for their content.

For more information, consult the Xbox support website via https://support.xbox.com/help/Hardware-Network/accessories/mouse-keyboard