product-specifications
Specifications
General
Type of speaker
Single unit
Features
Power saving
yes
NFC
no
Hands-free phone calls
yes
Tripod mount
no
Accessories
USB-C charge cable, 3.5mm audio cable
Control
Remote control
no
Controls
Bluetooth, power on/off, volume control, play controls, voice assistant
Connectivity
Connection type
wired, wireless
Bluetooth
yes
Cables included
Yes
Audio
Power output (peak)
20 W
Power output (RMS)
10 W
Frequency response
20 Hz - 20000 Hz
Driver size
45 mm
Driver units
2
Audio input
3.5 mm, Bluetooth, SD card
Speaker impedance
4 Ohm
Audio output
None
Input impedance
10000 Ohm
Headphone connection
no
Microphone built-in
yes
Microphone connection
no
Lighting
Lights
no
Protection
Waterproof
yes
IP Code (International Protection Rating)
IPX7
Power
Power cable detachable
yes
Input
Power source
USB, battery
Compatibility
Compatible Device Types
Bluetooth devices
Size & Weight
Weight of main unit
374 g
Depth of main product (in mm)
50 mm
Width of main product (in mm)
180 mm
Height of main product (in mm)
62 mm
Extra information
Item number
23827
EAN code
8713439238273
Warranty
1 year
Package contents
Bluetooth speaker
USB-C charge cable
Aux cable
User guide
System requirements
Bluetooth device / Aux output (3.5mm) / Micro SD
Wall charger or USB port
faq
FAQ
Frequently Asked Questions (FAQ)
- Connect the speaker to a USB-charger, which is connected to a wall power outlet.
- Charging the speaker will take approx. 3 hours.
- When the speaker has been fully charged, switch the speaker on by pressing the on/off button 1x.
- Start the pairing process by pressing the button (marked with the Bluetooth logo) 1x
- The LED on the speaker will flash blue when the speaker is in pairing mode.
- Go to the Bluetooth section on the device you are pairing to and select the TRUST ZOWY MAX to pair.
- The LED on the speaker will stay blue when the speaker has been successfully paired.
- The Zowy Max is ready for use.
You can pair two Zowy Max speakers.
You cannot pair the Zowy Max to a different type of speaker.
- Put the 2 speakers close together
- Press the button (marked with the Bluetooth logo) on the left speaker for 4 seconds
- The 2 speakers are linked together.
You switch the input mode by pressing the on/off button for 4 seconds (If you press it 1x, it will switch on/off instead).
You switch the speaker on/off by pressing the on/off button 1x (If you press it for 4 seconds, it will switch input mode instead).
To play music via SD-card, you have to switch to SD input mode. And use a fat32 formatted microSD card, with max. 32GB, with mp3 audio files.
Unfortunately, we do not have service centers to repair products.
A defective product should be replaced by your point of purchase during the warranty period.
We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty
IPX7: Can be submerged up to 1 meter in water for 30 minutes.
supportMail
Contact us
Contact us
Please check our FAQs first, chances are you'll find the answer there.
Couldn't find the answer in the FAQs? Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received.
After submitting the form a confirmation message will be displayed with your reference number. The confirmation will be sent to your email address at the same time as well. If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address.